Clean lips first - LipSense® Liquid Lip Color must be applied to clean dry lips. Define lips - for a more defined, finished look, we suggest first lining your lips using one of our beautiful shades of LinerSense®. LinerSense® is designed to blend and compliment all the LipSense® hues. LinerSense® must be shaken prior to application. Apply color onto the sable brush, and begin application to the outer corner of your lower lip, moving the color in one direction. Repeat this process for the upper lip. LipSense® Layering technique - LipSense® Liquid Lip Color must be shaken prior to application. LipSense® is applied by using a layering technique. Three layers is the recommended amount for maximum staying power. After placing color onto the wand, begin your application at the corner of your mouth, using the longest length of the applicator. Keep your lips apart, and follow the natural shape of your lips. Apply the color, moving it in one direction versus going back and forth like you would with lipstick. Let each layer set for a few seconds before proceeding to the next. When you have completed the application of the third layer of color and the color has set, apply one of the Moisturizing Glosses over the final layer. After applying the gloss, you may press your lips together and enjoy the glorious look and feel of this long lasting, advanced color technology!

APPLYING LINERSENSE

LinerSense® - Must be applied to clean dry lips. LinerSense® must be shaken prior to application.
	Apply the LinerSense® color onto the sable brush, and begin application to the outer corner of the lower lip moving the color in one direction.
	Repeat this process for the upper lip.

EYESHADOW APPLICATION

	ShadowSense™- The applicator in ShadowSense™ has the same configuration as the LipSense® product allowing ease and control in the application. Apply ShadowSense™ to the eyelid by stroking on the color with the applicator.
	You can easily blend ShadowSense™ by lightly stroking the color over the lid with your fingertip once it is applied.
	If a more detailed controlled coloration is desired, or you would like to contour a color, apply ShadowSense™ with the product applicator, then disperse the color with a separate sponge, sponge tip applicator, or small make-up brush.

 EYESENSE APPLICATION

	Shake first - EyeSense™ liquid eyeliner must be shaken first. Apply color onto brush - after you have shaken EyeSense™, place a small amount of liquid color onto the sable brush.
	Blow on the brush - Prior to application, be sure to lightly blow on the color on the brush of EyeSense. This aids in the evaporation of the liquid ingredient and allows for quick drying.
	Controlling the look - EyeSense is applied with a sable brush for complete control. If you desire a fine line, lightly touch the brush to the skin around the eye. For a thicker more defined look, press firmly.
	Line in one direction - begin by placing your brush on the corner of the lower lid, underneath the eyelashes and move the color in one direction. Repeat this process for the top eyelid.

LASHSENSE

	LashSense® -The wand for LashSense® is curved. When applying LashSense®, turn the curve away from the eye.
	This will allow you to coat even the tiniest lashes at the corner of the eye. Stroke the product onto the lash. Our mascara dries as it completely envelopes each lash.
	For more intense color, you may add additional coats of LashSense®.

BROWSENSE

	BrowSense® - Shake Brow Sense prior to application. BrowSense® offers a unique two-fold delivery system, consisting of a sable brush and a blending wand.
	Apply BrowSense® color onto the sable brush and apply short, hair like strokes of color where needed on the brow.
	On the other side you will find a wand, which easily and naturally disperses color where desired by stroking the wand through the brow area that the color has been applied.

Powered by CityMax.com